Suggested industries and uses:
Experience 80%-90% TE (Transfer Efficiency) and a cleaner work environment with Apollo Sprayers Turbospray HVLP spray systems, the easiest to use HVLP spray finishing systems available. Apollo’s gentle warm dry turbo air ensures no moisture contamination in your finish or your work.
With Apollo Sprayers turbo powered HVLP, more power and more atomizing pressure means more performance and more value for the finisher. Apollo Sprayers TrueHVLP™ Power-3 provides 15% more power than other systems in its class. Dare to compare to other HVLP systems. Apollo Sprayers higher pressure ensures your ability to spray the coatings of your choice with less compromise.
Great to spray a wide range of thin to medium viscosity finishes on wood projects, cars, boats, planes, fencing and more with the least amount of overspray. Excellent results when spraying all solvent-based materials: stains, lacquers, enamels, polyurethanes, most HVLP compatible waterborne coatings and more. Yields a high quality finish and suits smaller-scale professional and home-based operations.
Power-3 is available with the All-NEW AtomiZer® 7700 non-bleed spray gun in 1 Quart Bottom Cup, 4 models of Gravity Cup (90cc/250cc/600cc/1000cc) and an 8oz Mini-Cup. Our Handi-Hold® Spray Gun Docking Station, an Apollo innovation, will store, hold or transport your spray gun in a vertical position with no risk of knocking or falling over. It’s ready to spray when you are.
- 3 Stage
- 7.0 PSI (0.48 Bar) Sealed*
- 115 CFM (3.25 cmm)
- Dual Air Filtration
- HVLP Only, Single gun
- 110VAC – 60HZ or 240VAC – 50Hz
- 29 lbs/13.2 Kg
- 15″ X 8.5″ X 12″ (38.1cm X 21.6cm X 30.48cm)
- All EU units shipped
- All 110 volt units are tested and certified by ETL
Notes: *This unit is equipped with an internal air relief valve to accommodate a non-bleed style turbine spray gun. As a result the actual flow pressure may vary from the sealed pressure quoted.
Find a Distributor Near You
Power 3 with A7700QT
Power 3 with A7700GT-600