Apollo 1025 HVLP Turbine
Go Green With 4-Stage Power
Expand Your Range to Higher Viscosities.
Suggested industries and uses:
 Apollo Model 1025 is perfect for spraying solvent-based materials such as:
enamels, stains, lacquers, and polyurethanes, catalyzed finishes, conversion
varnish and linear polyurethanes, as well as any waterborne coatings, latex
(emulsion) paint (use with Floetrol® or similar flow additive) and other
specialized materials like contact cement, faux paints and gelcoat. Apollo 1025
is an extremely versatile unit and is widely used by woodworkers, boat builders
and restorers; for automotive and airplane restoration and finishing; and any
industry desiring super fine atomization with the widest range of materials.
The 1025 will support multiple spray gun operations with an optional
Y-connector, part #A4227. This model turbine
comes equipped with the Handi-Hold® Spray Gun Docking Station, Apollo's
newest innovation. Store, hold or transport your spray gun in a vertical position
with no risk of knocking or falling over. Ready to spray when you are.
(Click on the image for a larger view)
Specifications:
- 4 Stage
- 8.0 PSI (.055 bar)
- 130 CFM (3.68 cmm)
- Dual Air Filtration
- HVLP Only - Single Spray Gun
- 110VAC - 60HZ or 240VAC - 50Hz
- 30 lbs/13.6 Kg
- 15" X 8.5" X 12" (38.1cm X 21.6cm X 30.48cm)
- All EU units shipped
- All 110 volt units are tested and certified by
Supplied with:
- 24 foot (7.3 meter) flex air hose.
- Comes with an exceptional array of spray gun choices: A5006, A5011, A5021, A5505, A5510, A5520, A5530, A7500T, A7500QT, A7500MT, A7500GT-250, A7500GT-600, A7500GT-1000.
Notes:
- This unit is equipped with an internal air relief valve to accommodate a non-bleed style turbine spray gun.
ORDER NOW
|
